everything that rotates
                        needs to be balanced

 

XYO Balancer Blog  RSS

Vibration Information for rotating machinery applications.

 

Types of Belt Drives

Friday, March 23, 2012

Belt drives are widely used in many industries for power transmission since they are cheap and easy to maintain. However they are often a source of vibration due to misalignments, belt resonance, and belt wear.

The main purpose of belt drives is to transfer power between machines such as motor and fan. They are subject to rotary and push-pull motions with varying dynamic characteristics. Belts are friction drives, which mean they depend on friction between the belt and pulley/sheave to transmit power.

The most common types of belt drives include:

Round belts

Round belts are are generally made of rubber. This type of belt is generally used for light loads, such as in a sewing machine or a vacuum cleaner.

V belts

V belts are arguably the most widely used belts in industry. V belts have a V shaped cross-section, which rests against the side of V pulley under tension. The V shaped cross-section prevents belt from slipping off.

Flat belts

Flat belts are also used to transmit power from one shaft to another. They are generally classified as either small woven endless belts or higher power flat belts. The woven endless belts are especially useful where minimum vibration is required at the driven pulley due to semi-elastic material used in construction.  The higher power flat belts are often useful because they eliminate the need to high belt tension used to grip pulleys, which in turn reduces the load on the shaft bearings. The material used for high power flat belts is sticky yet abrasion-resistant rubber compounds.

Timing/toothed belts

Timing belts are toothed belts that use their teeth for power transmission, as opposed to friction. This configuration results in no slippage, and therefore, the driving and driven shafts remain synchronized. It’s more expensive to manufacture due to complexity of the belt and pulley shapes.

 

Trackback Link
http://www.xyobalancer.com/BlogRetrieve.aspx?BlogID=7348&PostID=463944&A=Trackback
Trackbacks
Post has no trackbacks.